SAW HEAD MOTION ON TWO LINEAR GUIDES
The motion of the saw head on double linear guide with preloaded ball screw slides drastically reduces vibrations during the cut.
The manual vertical circular sawing machine for the cut of tubes and profiles and characterized by its unique simplicity and flexibility of use
TIGER 352, electropneumatic manual vertical circular sawing machine to cut metals mitering from -45° to +60°. Upon request, it is provided with a pneumatic vice (MA) manually activated through a switch.
HEAVY-DUTY
> The cast-iron structure absorbs vibrations and ensures greater cutting stability and longer blade life.
> The two-stage gear transmission guarantees a high cutting efficiency and torque.
> The control panel equipped with thermal relay and minimum-tension coil ensures maximum protection against phase failure.
EXCEPTIONAL FLEXIBILITY
>The mechanical stops at -45°, 0°, +45° and +60° with locking device at all angles in between allow the quick positioning of the saw head.
> The clamping unit sliding longitudinally to the right and left of the saw head allows to safely perform even precise angle cuts.
> The adjustable steel anti-burr device clamps the material both in the infeed and outfeed, thus granting a burr-free cut.
> The adjustable pneumatic vice pressure (OPTIONAL) allows to adjust the clamping pressure according to the hardness of the material to cut.
> Engraved metric scale and flip-over stop are the perfect solution for precision and serial cuts at any length.
BOOK A DEMONSTRATION SESSION: TEST OUR SAWING MACHINES PERSONALLY AND DISCOVER ALL METAL CUTTING TECHNOLOGIES.
OUR TECHNICAL STAFF WILL BE READY TO GIVE YOU PERSONALIZED ADVICE ACCORDING TO YOUR NEEDS!
The motion of the saw head on double linear guide with preloaded ball screw slides drastically reduces vibrations during the cut.
The turning table is assembled on a central pin and thrust bearing for an easy and precise rotation.
The blade rotation at four speeds 15/30/45/90 rpm (OPTIONAL 30/60/90/180 rpm) with double polarity spindle motor and mechanical gearbox allows to perform efficient cuts of any kind of material.
Ø | ||||||
0° | 350 | 115 mm | 95 mm | 180 x 95 mm | 90 mm | |
+ 45° | 350 | 110 mm | 95 mm | 125 x 95 mm | 64 x 90 mm | |
+ 60° | 350 | 90 mm | 80 mm | 90 x 95 mm | 45 x 90 mm | |
- 45° | 350 | 110 mm | 95 mm | 125 x 95 mm | 64 x 90 mm |
Max. vice opening | 190 mm |
Disc size | HSS 350 x 32 x 2.5 mm |
Blade motor power | 1.8/2.6 Kw - Three-phase |
Blade rotation speed | 15/30/45/90 rpm |