TIGER 352 NC 5.0

  • TIGER 352 NC 5.0, electro-pneumatic automatic vertical sawing machine which can operate also in semi-auto- matic mode, to cut from 60° left to 45° right, with HSS blade.

    -CNC machine with a new controller : MEP 50 with Windows “CE” based. This new PLC has been specifically designed by MEP for the automation of its range of products.

    A FEW FEATURES:

    – 7” touch screen display operator interface and push buttons for all functions of the sawing machine. It is simple and intuitive , it guarantees a reliable use and it controls all cutting parameters in real time

    – Console with all centralized controls, installed on an articulated arm to follow the operator in every operating position for the controls and the EMERGENCY.

    – Registration of alarms and events with the possibility to visualize the story of occurred events.

    – Bar feeder with recirculating balls screw/nut and stepper motor (feed in length in one stroke 600 mm, that can be repeated in order to cut any length).

    – Optimization of the torque in two ranges ( 12÷40 and 36÷120 rpm ) combining the inverter features with the mechanical gear change (OPTIONAL 15÷50 and 45÷150 rpm with 3,0 kw motor and 5,5 kw inverter).

    – Panel with low tension controls: polyester membrane keypad with tactile thermo-shaped buttons which give out an acoustic signal when pressed.

    – Double set of gears to obtain a high performance.

    – Sawing head movement on double linear guides with preloaded slides with recirculating ballscrews.

    – Coaxial cylinder with bypass valve for fast approach and linear transducer for head position reading.

    – Cutting head and feeding vice positioning with joystick

    – Automatic acquisition of the actual starting point of the cut

    – Shearing stress control.

    – Rotating table on a center pin with axial bearing which allows higher precision on the cutting angle set.

    – Pneumatic vertical vice.

    – Electric pump for the blade lubrication and cooling.

    – Wire chip brush for band cleaning.

    – Indicator with flashing light in case cycle is stopped.

    – HSS blade Ø 350x32x2.5 for solids or sections.

    – Preset to be equipped with the spray mist system (OPTIONAL), as well as with the standard-delivered traditio- nal lubrication with emulsible oil.

    – Service keys and instructions manual for maintenance and spare parts list.

    FEATURED SPECIFICATIONS:

  • TIGER352NC

 

MEP SpA - Sede Legale: Via Brera, 3 - 20121 Milano (MI) - R.imprese, C.F. e P.Iva 13051480153 Cap. Sociale Eur 10.372.791,00 int. vers.