SHARK 652 SXI H 5.0

  • SHARK 652 SXI H 5.0, dual column electro-hydraulic band saw, equipped with blade 6700x41x1,3mm specifically designed to cut pipes and beams up to max 650x450mm at 0° and can miter  from +60° up to -60°.

    The machine is available in two versions both equipped with a simple touchscreen and the latest MEP controller which is designed exclusively for all our sawing machines.

    – MANUAL POSITIONING (manual rotation of the head with a  hand lever and a hydraulic brake to lock  the head into position; the cutting angle is visualized on a display).

    – AUTOMATIC POSITIONING  (programming of the cutting angle from the electrical panel with automatic hydraulic locking system).

    In the AUTOMATIC POSITIONING feature the cutting angle is determined by means of a gear/chain  system and 2 cutting cycles are available.

    A) AUTOMATIC CYCLE for cuts only at one angle

    B) AUTOMATIC CYCLE for cuts with 2 angles programmed to be initiated alternatively.

    To make the angle setting easier both versions A and B  can be equipped with a pair of pop-up hydraulic rollers (one for the infeed and one for the outfeed). This  avoids the material scraping onto the turn table when mitiring (OPTIONAL).


    – Structure in sturdy cast iron, to absorb vibrations and give the machine a better cutting stability and longer blade life.

    – Powerful 9,3kw (15hp) blade motor with vectorial inverter  in order to continuously adjust the blade speed in a single range from 15 to 150m/min.

    – Powerful coolant flows to wash the cutting area and to convey chips away.

    – Work light and laser projector to position the bar accurately in order to carry out non-standard or facing cuts.

    – Saw head stroke by means of double hydraulic cylinders on linear guides with ball-bearings and pre-loaded slides (3° canted head to make the chip removal easier for horizontal walls).

    – Self-adjustment cutting force by means of a servo valve mounted on the hydraulic cylinder.

    – Latest generation hydraulic control unit, with high efficiency and low energy consumption.

    – 7 “ touch screen which visualizes.

    – Two hydraulic cutting vises to clamp the material on both sides and one vertical hydraulic cylinder.

    – Automatic adjustment of the front guide arm in relation to the capacity that needs to be cut.

    – Adjustable blade-guide heads in steel, with roller  and carbide pads.

    – Servo control to shift idler pulley for blade changing (2200 kg).

    – Three coolant pumps to ensure high coolant flood (120 l/min) to cool down the blade and wash away chips from the working area.

    – Powered blade brush.

    – Belt chip conveyor ( Optional).

    – Machine can be handled with both lift truck and crane.

    –  BI-METAL band saw blade included.


MEP SpA Socio Unico - Sede: Via Enzo Magnani, 1 - 61045 Pergola (PU) - R.imprese, C.F. e P.Iva 13051480153 Cap. Sociale Eur 10.372.791,00 int. vers.