Segatrici a nastro - Band Sawing Machines
Shark 460 KONNECT, dual column automatic band saw suitable for cutting fabrication, stainless and alloy steel, solid and profile, with max size of 460x460mm. Dual column automatic band saw SHARK 460 KONNECT is the right solution in case high precision and accuracy is required on large size materials. Structure in grey cast iron G25, reducing […]
The SHARK 332 RC KONNECT band sawing machine, fully automatic and with programmable double cutting angle, maximizes safety and power for reliable performance and intelligent production that is always efficient.
-Automatic hydraulic mitring band sawing machine, with double cutting angle between -60° and +60°, with automatic and semi-automatic cycle operation for cutting iron pipes, profiles and beams.
TIGER 372 CNC LR 4.0 RC, ferrous circular saw with HSS blade for any kind of steel, with programmable head mitering trough MEP40 CNC controller. Automatic vertical circular saw powered by brushless motor mitering from -45° to +45° (see picture A) and up to +60° in semiautomatic mode. This machine can be equipped with the bar loader CB6001 (OPTIONAL) for rounds, square and rectangle materials according to technical specifications. It can also be retrofitted.
TIGER 402 CNC HR 4.0 RC, non-ferrous circular saw with TCT blade for aluminium and alloys, with programmable head mitering trough MEP CNC 40 controller.
Automatic vertical circular saw powered by brushless motor mitering from -45° to +45° (see picture A) and up to +60° in semiautomatic mode. This machine can be equipped with the bar loader CB6001 (OPTIONAL) for rounds, square and rectangle materials according to technical specifications.
Shark 281 NC 5.0, electrohydraulic automatic band sawing machine which can operate also in semi-automatic, semi-automatic/dynamic and manual mode to cut from 0° to 60° left. CNC machine with a new controller : MEP 50 with Windows “CE” based. This new PLC has been specifically designed by MEP for the automation of its range of products. A FEW FEATURES: 7” touch screen display operator interface and push buttons for all functions of the sawing machine.
SHARK 331-1 NC 5.0 spider, Electrohydraulic automatic band sawing machine which can also operate in semi-automatic cycle for cuts from 0° up to 60° left.
Machine with compact dimensions. CNC machine with a new controller: MEP 50 with Windows “CE” based. This new PLC has been specifically designed by MEP for the automation of its range of products.
SHARK 332-1 NC 5.0, electrohydraulic band sawing machine with multimicroprocessor which can operate in automatic, semi-automatic, semi-automatic/dynamic and manual mode. Automatic cycle (to cut from 0° to 60° left). Semi-automatic, semi-automatic/dynamic and manual cycle (for cuts from 45° right to 60° left). CNC machine with a new controller : MEP 50 with Windows “CE” based. This new PLC has been specifically designed by MEP for the automation of its range of products.
SHARK 230-1 NC HS 5.0, electrohydraulic automatic double-column bandsaw for 0° cuts on profiles and solid parts in structural, stainless and alloy steels, with restpiece which cannot be fed in automatic of 60 mm. It cuts dimensions up to 230×230 mm and can operate also in semi-automatic cycle. CNC machine with controlled double axis so as to obtain, on the same bar, 1000 different lots each of different lengths and quantities.CNC machine with a new controller : MEP 50 with Windows “CE” based.
SHARK 350 NC HS 5.0, electrohydraulic automatic double-column bandsaw for 0° cuts on profiles and solid parts in structural, stainless and alloy steels, for dimension up and in between 350mm x 350mm.
Standard machine features: Motorized chip conveyor which can be assembled on the left or right handside of the machine, Variable vice pressure allow to set the clamping force, Two vertical rollers assembled on the feeding vice to help align the material
Shark 350 CNC HS 4.0, automatic double-column bandsaw for 0° cuts on structural, stainless and alloys teels, profiles and solidparts, with dimensions up to 350×350 mm.
Standard machine features: Motorized chip conveyor which can be assembled on the left or right handside of the machine, Variable vice pressure allow to set the clamping force, Two vertical rollers assembled on the feeding vice to help align the material
Shark 420 CNC HS 4.0, automatic double-column bandsaw for 0° cuts on structural, stainless and alloy steels, profiles and solid parts, with dimensions up to 420×420 mm. CNC machine with a new controller: MEP 40. It has been specifically designed by MEP for the automation of its range of products. This sawing machine also features a semiautomatic cutting cycle and uses latest generation technologies.
Shark 660 CNC HS 4.0, automatic double-column bandsaw for 0° cuts on structural, stainless, alloy steels, profiles ,solid parts and profiles with dimensions up to 660x660mm. CNC machine with a new controller: MEP 40. It has been specifically designed by MEP for the automation of its range of products. This sawing machine also features a semiautomatic cutting cycle and uses latest generation technologies; indeed, Shark 660 CNC HS 4.0 is equipped with a NEW controller with processor RISC 32 bit 200 MHz with integrated interface.
TIGER 352 NC 5.0, electro-pneumatic automatic vertical sawing machine which can operate also in semi-auto- matic mode, to cut from 60° left to 45° right, with HSS blade. CNC machine with a new controller : MEP 50 with Windows “CE” based. This new PLC has been specifically designed by MEP for the automation of its range of products.A FEW FEATURES: 7” touch screen display operator interface and push buttons for all functions of the sawing machine. It is simple and intuitive.
COBRA 352 NC 5.0, automatic/semi-automatic electropneumatic CNC sawing machine to cut aluminium and light alloys using blade with electrowelded hard-metal plates (HM). The machine cuts from 45° right to 45° left and the head tilts from 0° to 45° left so as to make inclined cuts. CNC machine with a new controller : MEP 50 with Windows “CE” based. This new PLC has been specifically designed by MEP for the automation of its range of products.
TIGER 372 CNC LR 4.0, automatic electromechanical vertical sawing machine with HSS blade which can operate also in semi-automatic mode, to cut steels from 45° right to 60° left. CNC machine with controlled double axis multimicroprocessor to obtain, on the same bar or on the material located on the loading magazine CB6001. OPTIONAL VERSION: TIGER 372 CNC LR 4.0 RB , with automatic rotating table 3 positions: 45°left ,0° and 45°right.
TIGER 402 CNC HR 4.0, automatic electro-pneumatic vertical sawing machine to cut aluminium and light alloys from 45° right to 60° left.
OPTIONAL VERSION: TIGER 402 CNC HR 4.0 RB , with automatic rotating table 3 positions: 45°left, 0° and 45°right. CNC machine with controlled double axis multimicroprocessor so as to obtain, on the same bar or on the material located on the loading magazine CB6001 (OPTIONAL), up to 300 cutting programs each of different lengths and quantities.
VELOCEX LINE – HIGHLY EFFICIENT AND PRODUCTIVE HIGH SPEED CIRCULAR SAWING MACHINES: WITH TUNGSTEN CARBIDE TIPPED or cermet blades, HIGH PRODUCTIVITY, GOOD FINISH, PRECISE LENGTH AND BURR FREE CUTS CAN BE OBTAINED ON CONTINOUS BASIS!
VELOCEX 65: AUTOMATIC CIRCULAR SAWING MEP MACHINE WITH TUNGSTEN CARBIDE TIPPED or cermet blades, suitable for metals, ferrous & non-ferrous materials to cut solid / structural – section round / square / rectangular / hollow tubes at 0°
VELOCEX LINE – HIGHLY EFFICIENT AND PRODUCTIVE HIGH SPEED CIRCULAR SAWING MACHINES: WITH TUNGSTEN CARBIDE TIPPED or cermet blades, HIGH PRODUCTIVITY, GOOD FINISH, PRECISE LENGTH AND BURR FREE CUTS CAN BE OBTAINED ON CONTINOUS BASIS!
VELOCEX 80: AUTOMATIC CIRCULAR SAWING MEP MACHINE WITH TUNGSTEN CARBIDE TIPPED or cermet blades, suitable for metals, ferrous & non-ferrous materials to cut solid / structural – section round / square / rectangular / hollow tubes at 0°
VELOCEX LINE – HIGHLY EFFICIENT AND PRODUCTIVE HIGH SPEED CIRCULAR SAWING MACHINES: WITH TUNGSTEN CARBIDE TIPPED or cermet blades, HIGH PRODUCTIVITY, GOOD FINISH, PRECISE LENGTH AND BURR FREE CUTS CAN BE OBTAINED ON CONTINOUS BASIS!
VELOCEX 100: AUTOMATIC CIRCULAR SAWING MEP MACHINE WITH TUNGSTEN CARBIDE TIPPED or cermet blades, suitable for metals, ferrous & non-ferrous materials to cut solid / structural – section round / square / rectangular / hollow tubes at 0°
VELOCEX LINE – HIGHLY EFFICIENT AND PRODUCTIVE HIGH SPEED CIRCULAR SAWING MACHINES: WITH TUNGSTEN CARBIDE TIPPED or cermet blades, HIGH PRODUCTIVITY, GOOD FINISH, PRECISE LENGTH AND BURR FREE CUTS CAN BE OBTAINED ON CONTINOUS BASIS!
VELOCEX 125: AUTOMATIC CIRCULAR SAWING MEP MACHINE WITH TUNGSTEN CARBIDE TIPPED or cermet blades, suitable for metals, ferrous & non-ferrous materials to cut solid / structural – section round / square / rectangular / hollow tubes at 0°
Copyright © 2021 ·