MEP attending once again at BIMU show in Milan in its 31st edition, from October 09 to 13. Come and see us at booth E130 hall 11!

Milan (I), October 09 – October 13, 2014: MEP is proud to inform you that also this year we will be present at the most important italian fair of the sector that will be in Fieramilan (Rho) from 09 October to 13 October 2018. Dedicated to the industry manufacturing metal cutting and metal forming machine […]

MEP SPA’S ROADSHOW AND BOOKBUILDING CONTINUES FOR LISTING ON AIM ITALIA!

DOWNLOAD INGLESE  

MACH 2018. 09-11 APRIL 2018. BIRMIGHAM, UNITED KINGDOM.

MACH is the outstanding showcase for advances in the manufacturing industry brought to you by the Manufacturing Technologies Association (MTA), a UK based trade association dealing specifically with engineering based manufacturing. It is a biennial exhibition which brings together all the best innovations and latest developments to come from the manufacturing technologies sectors under one […]

VIDEO: is now available the new demo-video for model SHARK 382 CCS HYDRA

Available on line now the new demo-video of the cold saw model SHARK 382 CCS HYDRA, available on our youtube channel and on product features page! Enjoy!!

VIDEO: is now available the new demo-video for model SHARK 282 NC 5.0!

Available on line now the new demo-video of the cold saw model SHARK 282 NC 5.0, available on our youtube channel and on product features page! Enjoy!!!

VIDEO: is now available the new demo-video for model SHARK 332CCS HYDRA!

Available on line now the new demo-video of the cold saw model  SHARK 332CCS HYDRA, available on our youtube channel and on product features page! Enjoy!!!

VIDEO: is now available the new demo-video for model SHARK 282!

Available on line now the new demo-video of the cold saw model  SHARK 282, available on our youtube channel and on product features page! Enjoy!!!

VIDEO: is now available the new demo-video for model SHARK 452 CCS!

Available on line now the new demo-video of the cold saw model SHARK 452 CCS, available on our youtube channel and on product features page! Enjoy!!!

PH RANGE IS GROWING WITH A NEW MODEL: PH 262/HB IS THE NATURAL “EVOLUTION” OF PH 261-1/HB!

The PH 262, manual band sawing machines for cuts from -45° to +60° is also supplied in a version with Hydraulic Brake device (HB) to make single cuts without operator but keeping the manual cutting cycle available (the HB device is available only in the three-phase version). A FEW FEATURES – Sturdy structures in cast […]

HYDMECH: WESTEC. September 15-17, 2015 Los Angeles, USA.

Los Angeles (USA), September 15-17, 2015: WESTEC, the West Coast’s premier manufacturing event, gives you access to hundreds of industry experts and allows you to evaluate and compare cutting-edge manufacturing equipment, advanced technologies, new products and applications.

FABTECH May 05-07, 2015. Monterrey, MEXICO

Monterrey (MX), May 05-07, 2015: the event will feature 450 exhibiting companies, cover 110,000 net square feet of floor and offer an anticipated 10,000 attendees from Mexico and all the world. The fair offer unlimited opportunities to network, learn and experience the latest innovations in the metal forming, fabricating, welding and finishing industries.  STAND: 1505 […]

test

IMPORTANT NOTICE !!!

We inform you that due to maintenance work on company servers our offices will be closed on the 21st and 22nd of August. Therefore e-mail and telephones will be not operating. We apologise for any inconvenience.

SHARK 332 CCS HYDRA

SHARK 332 CCS hydra, band sawing machine for single cuts without operator from 60° on the left to 45°. CUTTING CYCLE: After positioning the bar, operate through the new console to access the following controls: -vice closing ; -starting the cutting cycle that uses the weight of the head controlled by a hydraulic braking circuit to adjust the feeding speed. After the cut, by the keyboard controls, the operator lifts the head through a hydraulic control unit till the necessary position and opens again the pneumatic vice to enable a new bar feeding.

SHARK 382 CCS HYDRA

SHARK 382 CCS hydra, band sawing machine for single cuts without operator from 60° on the left to 45°. CUTTING CYCLE: After positioning the bar, operate through the new console to access the following controls:- vice closing ;- starting the cutting cycle that uses the weight of the head controlled by a hydraulic braking circuit to adjust the feeding speed. After the cut, by the keyboard controls, the operator lifts the head through a hydraulic control unit till the necessary position and opens again the pneumatic vice to enable a new bar feeding.

SHARK 452-1 CCS

SHARK 452-1 CCS, sawing machine for single cuts without operator with 4500x34x1,1 mm band, for cutting pipes, profiles and beams up to 450×320 mm at 0°. Extremely versatile machine, for cuts between 60° left and 60° right. CUTTING CYCLE: after positioning the bar and closing the vice, the cutting phase is started, using the weight of the saw head controlled by a hydraulic braking circuit to adjust the feeding speed; after the cut, the saw head is manually lifted till the position needed for the beam to be fed.

SHARK 452-1 CCS HYDRA

SHARK 452-1 CCS HYDRA, band sawing machine for single cuts without operator on pipes, profiles and beams, up to 450×320 mm at 0°. Extremely versatile machine, for cuts between 60° on the left and 60° on the right. CUTTING CYCLE: After positioning the bar, operate through the new console to access the following controls: vice closing ;starting the cutting cycle that uses the weight of the arc controlled by a hydraulic braking circuit to adjust the feeding speed.

SHARK 422 SXI EVO

Shark 422 SXI evo, semi-automatic, electro-hydraulic sawing machine, to cut from 45° left to 60° right. Machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP. Semi-automatic cycle: starting the cycle: the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens. These machines are extremely versatile (they can cut from 45° left to 60° right) despite their high cutting capacity (beams and solid pieces up to 420×300 mm at 0°) and have been designed to make the cutting preparation steps easy.

SHARK 422 SXI/E

Shark 422 SXI/E, semi-automatic, electro-hydraulic sawing machine, with controller MEP 27 so as to be equipped with the following OPTIONALS upon request: + Control of the automatic head rotation (programming and locking of the cutting angle through keyboard with displaying, 4 programmable angles that can be displayed and operated through buttons). + Automatic vice transfer […]

SHARK 282 NC 5.0

SHARK 282 NC 5.0, electro-hydraulic automatic band sawing machine which can operate also in semi-automatic, semi-automatic/dynamic and manual mode.
Automatic cycle cut from 0° to 60° left. Semi-automatic, semi-automatic/dynamic and manual cycle (for cuts from 45° right to 60° left). CNC machine with a new controller : MEP 50 with Windows “CE” based. This new PLC has been specifically designed by MEP for the automation of its range of products.

MEP SpA - Sede Legale: Via Brera, 3 - 20121 Milano (MI) - R.imprese, C.F. e P.Iva 13051480153 Cap. Sociale Eur 10.372.791,00 int. vers.