SHARK 281 SXI EVO

SHARK 281 SXI evo, semi-automatic, electro-hydraulic band sawing machine for cutting from 0° to 60° left. Machine with controlled single axis microprocessor with the latest generation of controllers for semi-automa tic sawing machines designed by MEP. OPERATION: starting the cycle by means of the relative push-button, the following steps are carried out: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens.

SHARK 282 SXI EVO

Shark 282 SXI evo, semi-automatic electro-hydraulic band sawing machine, with operation also in manual and semi-automatic dynamic cycle, for cutting from 45° right to 60° left. Machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP. Semi-automatic cycle: Starting the cycle: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens.

SHARK 332 SXI EVO

SHARK 332 SXI evo, semi-automatic electro-hydraulic sawing machine , with operation also in manual and semi-automatic dynamic cycle, for cutting from 45° right to 60° left. Machine with controlled single axis microprocessor with the latest generation of controllers for semi-automa- tic sawing machines designed by MEP. Semi-automatic cycle: starting the cycle: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens.

SHARK 382 SXI EVO

SHARK 382 SXI evo, semi-automatic electro-hydraulic sawing machine , with operation also in manual and semi-automatic dynamic cycle, for cutting from 45° right to 60° left. Machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP. Semi-automatic cycle: starting the cycle: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens.

SHARK 452-1 SXI EVO

SHARK 452-1 SXI evo, semi-automatic electro-hydraulic sawing machine with 4500x34x1,1 mm band, to cut pipes, profiles and beams up to 450×320 mm at 0°. Extremely versatile machine, for cuts between 60° left and 60° right. A FEW FEATURES: – Console with all centralized controls, installed on an articulated arm to follow the operator in every operating position for the controls and the EMERGENCY. – Latest generation hydraulic control unit, with high efficiency and low energy consumption. – The headstroke, according to the dimensions of the material which has to be cut, is set directly from the control panel.

SHARK 512 SXI EVO

SHARK 512 SXI evo, semi-automatic electro-hydraulic sawing machine with 4640x34x1,1 mm band, to cut pipes, profiles and beams up to 510×320 mm at 0°. Extremely versatile machine, for cuts between 60° left and 60° right. CUTTING CYCLE: after having positioned the bar, starting the cycle the following operations are performed: vice closing – motor start – head descent for cutting – motor stop – head return – vice opening. CYLCE DOWN UP: Operating in semiautomatic cycle , the new function DOWN makes the head and blade motor stop once the cut is finished with the vice closed, by pressing the UP button the head raises back to its starting point and the vice opens.

SHARK 652 SXI H 5.0

SHARK 652 SXI H 5.0, dual column electro-hydraulic band saw, equipped with blade 6700x41x1,3mm specifically designed to cut pipes and beams up to max 650x450mm at 0° and can miter from +60° up to -60°. The machine is available in two versions both equipped with a simple touchscreen and the latest MEP controller which is designed exclusively for all our sawing machines. MANUAL POSITIONING (manual rotation of the head with a hand lever and a hydraulic brake to lock the head into position; the cutting angle is visualized on a display).

TIGER 352 SX EVO

TIGER 352 SX evo, semi-automatic vertical sawing machine to cut steels from 60° left to 45° right, with HSS blade. Machine with controlled single axis microprocessor with the latest generation of controllers for semi-automa- tic sawing machines designed by MEP. OPERATION: starting the cycle by means of the relative push-button, the following steps are carried out: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens.CYCLE DOWN UP : Operating in semiautomatic cycle , the new function DOWN makes the head and blade motor stop once the cut is finished with the vice closed, by pressing the UP button the head raises back to its starting point and the vice opens.

TIGER 372 SX EVO

TIGER 372 SX evo, semi-automatic vertical sawing machine to cut steels from 60° left to 45° right, with HSS blade. Machine with controlled single axis microprocessor with the latest generation of controllers for semi-automa- tic sawing machines designed by MEP. OPERATION: Starting the cycle by means of the relative push-button the following steps are carried out: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens.

COBRA 352 SX EVO

COBRA 352 SX evo, semi-automatic electropneumatic sawing machine to cut aluminium and light alloys using blade with electrowelded hardmetal plates (HM). The machine cuts from 45° right to 45° left and the head tilts from 0° to 45° left so as to make inclined cuts. Sawing machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP. OPERATION: Starting the cycle by means of the relative push-button the following steps are carried out: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens.

THOR 450

Band sawing machines,semi-automatic,double column
0° cuts, suitable for ferrous & non-ferrous matal’s
Machine designed to suit bi-metal as well as TCT (carbide tipped) blade.

THOR 560

Band sawing machines,semi-automatic,double column
0° cuts, suitable for ferrous & non-ferrous matal’s
Machine designed to suit bi-metal as well as TCT (carbide tipped) blade.

THOR 660

Band sawing machines,semi-automatic,double column
0° cuts, suitable for ferrous & non-ferrous matal’s
Machine designed to suit bi-metal as well as TCT (carbide tipped) blade.

THOR 860

Band sawing machines,semi-automatic,double column
0° cuts, suitable for ferrous & non-ferrous matal’s
Machine designed to suit bi-metal as well as TCT (carbide tipped) blade.

THOR 1020

Band sawing machines,semi-automatic,double column
0° cuts, suitable for ferrous & non-ferrous matal’s
Machine designed to suit bi-metal as well as TCT (carbide tipped) blade.

MEP SpA - Sede Legale: Via Brera, 3 - 20121 Milano (MI) - R.imprese, C.F. e P.Iva 13051480153 Cap. Sociale Eur 10.372.791,00 int. vers.