CAST-IRON STRUCTURE
Cast-iron structure of the saw head, cutting table and vice to absorb vibrations during the cut and ensure longer blade life.
Manual pull-down band sawing machine ideal for all cutting needs of the contemporary workshop and which can work with or without operator
SHARK 282 CCS, manual pull-down band sawing machine to cut metals mitering from -45° to +60°, can also perform single cuts without operator.
HEAVY-DUTY
> The double spring to handle the saw head ensures maximum rigidity of movement.
> The large working surface ensures stability and safety during the cut.
> The cast-iron slide for the blade tensioning ensures an easy regulation and a smooth sliding over time.
> The high flow pump for the coolant ensures a constant blade lubrication and cooling.
EXCEPTIONAL FLEXIBILITY
> The turning cutting table is assembled on a preloaded roller thrust bearing thus allowing an easy and smooth rotation at any angle and turning along with the saw head thus preventing to cut it through.
> The mechanical stops at -45°, 0°, +45° and +60° with locking device at all angles in between ensure the quick positioning of the saw head.
> The quick releasing clamping system allows to manually open/close the vice in an easy way.
> The clamping unit sliding longitudinally to the right and left of the saw head allows to safely perform even precise angle cuts.
> The pressure gauge for blade tensioning allows to keep it constantly monitored.
> Saw head down feed rate by gravity through the Cut Control System (CCS) which, in addition to manual cutting, allows to execute single cuts without operator, who can choose the desired function through a selector on the control panel.
BOOK A DEMONSTRATION SESSION: TEST OUR SAWING MACHINES PERSONALLY AND DISCOVER ALL METAL CUTTING TECHNOLOGIES.
OUR TECHNICAL STAFF WILL BE READY TO GIVE YOU PERSONALIZED ADVICE ACCORDING TO YOUR NEEDS!
Cast-iron structure of the saw head, cutting table and vice to absorb vibrations during the cut and ensure longer blade life.
Adjustable and extremely wear-resistant hard metal blade-guide pads that ensure longer blade life and cutting stability.
The CCS system allows to perform single cuts without operator - Saw head down feed rate by gravity: the cutting of the material is executed in automatic mode once the operator starts the cycle.
0° | 250 mm | 220 mm | 280 x 220 mm |
+ 45° | 230 mm | 200 mm | 220 x 200 mm |
+ 60° | 120 mm | 80 mm | 140 x 80 mm |
- 45° | 200 mm | 170 mm | 200 x 140 mm |
Max. vice opening | 285 mm |
Band size | 2950 x 27 x 0.9 mm |
Blade motor power | 1.5 / 1.8 Kw - Three-phase |
Blade rotation speed | 36 / 72 m/min - 2 Speeds |