HIGH-PERFORMANCE CIRCULAR SAWING MACHINE FOR MASS PRODUCTION
High-speed circular band sawing machine for large-scale mass production: cutting performance at least twice higher than a band sawing machine.
The circular sawing machine for high-speed cutting of solid bars of diameter of up to 150 mm that makes the difference in terms of power and reliability
VELOCEX 150, automatic circular sawing machine for 0° high-speed cuts of steels and alloys.
MAXIMUM PRECISION
> The hydraulic bar feeder lifting system avoids the contact of the bar with the surfaces of the cutting vice while feeding the material, thus preserving them as well as the surface of the bar.
> The automatic back sliding of bar feeder at the end of each cut avoids the contact of the bar with the disc while going backwards to the upper position, thus preserving the surface of the material and hard metal teeth of the disc.
> The hard metal blade-guide pads ensure compliance with cutting tolerances.
PRODUCTIVITY GUARANTEED
> The saw head motion powered by a servo motor on linear guides with preloaded ball screw and the electromagnetic clutch ensure a mechanical vibration reduction during the cut and longer blade life.
> Bar feeder with single stroke 1000 mm, repeatable to cut at any length, is tilting to facilitate feeding of even non-straight bars.
> The two position swinging guide to unload pieces automatically separates trims and remnants from production pieces, thus optimizing the production process.
BOOK A DEMONSTRATION SESSION: TEST OUR SAWING MACHINES PERSONALLY AND DISCOVER ALL METAL CUTTING TECHNOLOGIES.
OUR TECHNICAL STAFF WILL BE READY TO GIVE YOU PERSONALIZED ADVICE ACCORDING TO YOUR NEEDS!
High-speed circular band sawing machine for large-scale mass production: cutting performance at least twice higher than a band sawing machine.
Carbide tipped circular saw blade for high production, excellent finishing and accuracy in lenghts.
The material library allows the automatic setting of the blade speed (S) and head down feed rate (F) according to the type of material.
From the extendable material library, you can choose the type and the geometry of the material, the hardness and the type of blade. Accordingly, the control sets the right blade speed and head down feed rate.
8'' Mitsubishi touchscreen control allowing to set: saw head down feed rate, chip load, blade speed, number of cuts to execute, material size, cutting length.
Moreover, it shows cutting time, cycle time and number of cuts executed.
Motion of the saw head powered by a servo motor on linear guides with preloaded ball screw lines on ball screw nut that ensures a mechanical vibration reduction during the cut, thus giving the machine greater cutting stability.
Bar feeder double clamping system with single stroke of 1000 mm repeatable to cut to any length and sliding on ball screw linear guides through brushless motor and ball screw nut, thus granting the utmost accuracy.
0° | 150 mm | 130 mm | 140 mm |
Max. vice opening | 160 mm |
Minimum cut off length | 20 mm |
Remnant length | 100 mm /120 mm + cut length |
Circular saw blade dimension |
460 x 2.7 x 2.25 x 50 - 4/15/80 & 4/12/90mm 530 x 2.7 x 2.25 x 50 - 4/15/80 & 4/12/90mm |
Blade motor | 30 Kw - Three-phase |
Blade speed | 50 ÷ 200 m/min |